Use this DigiSender SMF Fibre Optic Cable for any of the DigiSender Modules available in this range.

All DigiSender fibre cables use a plasticised glass fibre core which is immune to breakage under normal flexing. This core is 0.01mm in diameter but so tough that a bend radius needs to be created of typical 1mm before permanent damage is caused to the fibre core. To prevent this we encase our entire fibre cable series in a protective braid known as 'polyamide fibres' which when woven are commonly known as Kevlar. This prevents the cable from being bent at such sever angles. The kelar braid is bonded to the fibre core using a compound composed of thermoplastic compounds that emit limited smoke and no halogen. Kevlar is a class of strong heat-resistant synthetic fibre materials commonly used in aerospace and military applications. It is so incredibly tough that it is often used for ballistic-rated body armour and ballistic composites.  It is also used as an asbestos substitute because it has extremely high flame immunity. They are fibres in which the chain molecules are highly oriented along the fibre axis, so the strength of the chemical bond can be exploited when force is required to pull the cable through ducting. This alone creates an incredibly tough protection and makes it extremely difficult to accidentally break the internal plasticised glass fibre core. In fact, it requires the use of tools such as pliers or hammers to break the core and cannot generally be broken by human pulling forces between your hands. It also means that  pulling forces typically of 20N can be applied during installation of this cable. This cable type is sold under separate categories within the DigiSender Fibre range for permanent installations.

The maximum pulling force is 10N with momentary pulling forces of 20N.

The cable jacket is composed of thermoplastic compounds that emit limited smoke and no halogen when exposed to high sources of heat or flame

We provide the cable in any length and offer a custom manufacturing facility. (For custom lengths  we usually deliver within 7 days).

2mm diameter for permanent  or temporary deployment applications.
Weight: 5.3Kg/1Km}
Return losses start at a bending radius of 60mm or more
Extremely Robust (Breakage only likely to occur when cable is forcible kinked to a zero bending radius)
Pulling force: 10N (Momentary 20N)
Break test:: >50N (Tested on one core)

Applications:
Indoor Display Screens, CCTV, Signage

Suitable for locations including:
Airports, Railway Stations, Hotels, Residential, Commercial, Aircraft, Vehicles etc